Toshiba B-SX5T, B-9700-LAN-QM-R, B9700LANQMR manual 38 mm ±3 mm

2. SUPPLY SPECIFICATIONS

EO10-33013B

(Revision Date: May 22, 2009)

2.7 SPECIFICATION OF RFID TAG (for B-SX704-RFID-U2-CN -R)

(1) Omron Wave tag

It is recommended to locate the vertical center of an RFID tag at 38 mm ± 3 mm from a leading edge of a label and align the horizontal center with the horizontal center of the label.

38 mm ±3 mm

Media feed direction

[Printer settings for use of this tag]

In the printer system mode, set the RFID-related parameters as follows:

Q value: 2, WT AGC (AGC threshold for data write): 10, WT MIN AGC (AGC threshold lower limit for

retry): 10

As the AGC value of this tag is high, the antenna may be able to communicate with non-target tags. To prevent interferences from non-target tags, a target tag is identified by measuring the AGC of the tags within the read range. A tag of which AGC is equal to or higher than the specified threshold (10) is considered to be positioned just above the antenna (=target tag), and a data write is performed on it. When the AGC is less than the threshold, a data write is not performed on such tags.

2-27