Label | Toshiba B-SX4T-QQ guide

APPENDIX 1 SPECIFICATIONS	ENGLISH VERSION EO1-33034
	A1.3 Media

A1.3.1		Media Type (Cont.)					[Unit: mm]
		Label dispensing mode		Batch mode	Strip mode	Cut mode
	Item			Batch mode	Strip mode	Rotary cutter (*2)	Swing cutter
	Item					Rotary cutter (*2)	Swing cutter

	cMedia pitch		Label	10.0 – 1500.0	25.4 – 1500.0	3”/sec., 6”/sec.: 38.0 - 1500.0	38.0 – 1500.0
	cMedia pitch		Tag	10.0 – 1500.0	----	3”/sec., 6”/sec.: 30.0 – 1500.0	25.4 – 1500.0
	d		Tag	10.0 – 1500.0	----	3”/sec., 6”/sec.: 30.0 – 1500.0	25.4 – 1500.0
	eMedia length			8.0 – 1498.0	23.4 – 1498.0	3”/sec., 6”/sec.: 25.0 – 1498.0	25.0 – 1498.0 (*1)
	fWidth including backing paper (See NOTE 5.)			30.0 – 112.0	50.0 – 112.0	30.0 – 112.0
	gLabel width (See NOTE 5.)			27.0 – 109.0	47.0 – 109.0	27.0 – 109.0
	hGap length			2.0 – 20.0		6.0 – 20.0
	iBlack mark length (Tag paper)					2.0 – 10.0
	Effective print width					10.0 – 104.0 ±0.2
	jEffective print length		Label	6.0 – 1496.0	21.4 – 1496.0	3”/sec., 6”/sec.: 23.0 - 1496.0	23.0 – 1496.0
	jEffective print length		Tag	8.0 – 1498.0	----	3”/sec., 6”/sec.: 28.0 – 1498.0	23.0 – 1498.0
	k		Tag	8.0 – 1498.0	----	3”/sec., 6”/sec.: 28.0 – 1498.0	23.0 – 1498.0
	Print speed up/slow down area					1.0
	Thickness		Label			0.13 – 0.17
	Thickness		Tag			0.15 – 0.29
			Tag			0.15 – 0.29
	Maximum effective length for on the fly issue					1361.0
	Maximum outer roll diameter					Ø 200
	Roll direction					Inside
	Inner core diameter					Ø 76.2±0.3

NOTES:

1.To ensure print quality and print head life use only TOSHIBA TEC specified media.

2.The media length specifications for use of the cutter are:

*1: When issuing a label using the swing cutter, label length should be 35.0 mm – (Gap length/2).

*2: The rotary cutter does not support the print speed of 10”/sec.

When using the Rotary Cutter, be sure to install the Ribbon Saving Module (B-9904-R-QM). Failure to do this may cause a paper jam or ribbon error.

3.When marking black marks on the label rolls, they should be marked at the gaps.

4.“On the fly issue” means that the printer can feed and print without stopping between labels.

5.There are restrictions in use of the media which is narrower than 50 mm. For details, refer to TOSHIBA TEC service representative.

A1.3.2 Detection Area of the Transmissive Sensor

The Transmissive Sensor is movable from the centre to the left edge of media.

The Transmissive Sensor detects a gap between labels, as illustrated below.

<Label>

Area to be detected.

Centre of media

Sensor position

Print side

Min. 2.0 mm

Label

Gap

(Min. 6.0 mm when using

the cutter module.)

Label

Min. 12 mm

Media feed direction

Sensor is movable

within this range.

EA1- 3

B-SX4T-QQ specifications

The Toshiba B-SX4T-QQ is a robust and versatile industrial printer designed to meet various labeling and printing needs across diverse industries. This printer stands out for its compact design, making it suitable for environments where space is at a premium. With its advanced features and technologies, the B-SX4T-QQ provides exceptional performance and reliability.

At the heart of the B-SX4T-QQ is its high-resolution printing capability. It offers a print resolution of up to 300 dpi, which guarantees crisp and clear labels, barcodes, and graphics. This high resolution is vital for applications requiring fine detail, such as small labels used in electronics or pharmaceuticals.

One of the most remarkable features of the B-SX4T-QQ is its dual-technology printing capability. It can operate with both thermal transfer and direct thermal printing methods, providing flexibility for various labeling materials and applications. This adaptability allows users to choose the best printing method based on the specific media and the intended use of the labels.

The printer is equipped with a fast processing speed, capable of producing high-quality prints at a rate of up to 6 inches per second. This efficiency is essential for high-volume printing environments, where time and productivity are critical. Accompanied by a large media capacity, the B-SX4T-QQ minimizes downtime caused by the need for frequent media replacement.

Connectivity is another highlight of the Toshiba B-SX4T-QQ. It supports multiple interfaces, including USB, serial, and Ethernet, facilitating seamless integration with existing systems and networks. This versatility makes it compatible with various operating environments, enhancing workflow efficiency.

The B-SX4T-QQ is built with durability in mind. Housed in a rugged casing, it is designed to withstand the rigors of industrial use. Its reliable performance is further enhanced by enhanced features such as a user-friendly LCD display and intuitive control panel, making operation and monitoring straightforward.

In terms of software compatibility, the printer supports multiple programming languages, including PPL and ZPL, which ensures ease of integration with various applications. This capability is particularly beneficial for businesses that require custom label designs and specific printing configurations.

Overall, the Toshiba B-SX4T-QQ is an excellent choice for businesses looking for a reliable, versatile, and high-performance industrial printer. Its combination of advanced features, robust design, and ease of use positions it as a valuable asset in any labeling operation.

Toshiba B-SX4T-QQ owner manual A1.3.2 Detection Area of the Transmissive Sensor, Label

Models: B-SX4T-QQ

A1.3.1

[Unit: mm]

A1.3.2 Detection Area of the Transmissive Sensor

<Label>

B-SX4T-QQ specifications