4. MAINTENANCE

ENGLISH VERSION EO1-33034

4.1 Cleaning

4. MAINTENANCE

WARNING!

1.Be sure to disconnect the power cord before performing maintenance. Failure to do this may cause an electric shock.

2.To avoid injury, be careful not to pinch your fingers while opening or closing the cover and print head block.

3.The print head becomes hot immediately after printing. Allow it to cool before performing any maintenance.

4.Do not pour water directly onto the printer.

This chapter describes how to perform routine maintenance.

To ensure the continuous high quality operation of the printer, you should perform a regular maintenance routine. For high throughput it should be done on a daily basis. For low throughput it should be done on a weekly basis.

4.1 Cleaning

4.1.1Print Head/Platen/ Sensors

CAUTION!

1.Do not allow any hard objects to touch the Print Head or Platen, as this may cause damage to them.

2.Do not use any volatile solvent including thinner and benzene, as this may cause discoloration to the cover, print failure, or breakdown of the printer.

3.Do not touch the Print Head Element with bare hands, as static may damage the Print Head.

4.Be sure to use the Print Head Cleaner enclosed with this printer. Failure to do this may shorten the Print Head life.

NOTE:

Please purchase the Print Head Cleaner (P/No. 24089500013) from your authorised TOSHIBA TEC service representative.

To maintain the printer performance and print quality, please clean the printer regularly, or whenever the media or ribbon is replaced.

1.Turn off the power and unplug the printer.

2.Open the Top Cover.

3.Turn the Head Lever to Free position, then release the Ribbon Shaft Holder Plate.

4.Open the Print Head Block.

5.Remove the ribbon and media.

6.Clean the Print Head Element with a Print Head Cleaner or a cotton swab or soft cloth slightly moistened with alcohol.

Pinch Roller

Print Head

Print Head

Element

Platen

Feed Roller

Black Mark Sensor/

Feed Gap Sensor

7.Wipe the Platen, Feed Roller, and Pinch Roller with a soft cloth slightly moistened with alcohol. Remove dust or foreign substances from the internal part of the printer.

8.Wipe the Feed Gap Sensor and Black Mark Sensor with a dry soft cloth.

E4- 1

Page 29 Page 31
Page 30
Image 30
Toshiba B-SX4T-QQ owner manual Maintenance, Cleaning, Print Head/Platen/ Sensors
Page 29 Page 31

B-SX4T-QQ specifications

The Toshiba B-SX4T-QQ is a robust and versatile industrial printer designed to meet various labeling and printing needs across diverse industries. This printer stands out for its compact design, making it suitable for environments where space is at a premium. With its advanced features and technologies, the B-SX4T-QQ provides exceptional performance and reliability.

At the heart of the B-SX4T-QQ is its high-resolution printing capability. It offers a print resolution of up to 300 dpi, which guarantees crisp and clear labels, barcodes, and graphics. This high resolution is vital for applications requiring fine detail, such as small labels used in electronics or pharmaceuticals.

One of the most remarkable features of the B-SX4T-QQ is its dual-technology printing capability. It can operate with both thermal transfer and direct thermal printing methods, providing flexibility for various labeling materials and applications. This adaptability allows users to choose the best printing method based on the specific media and the intended use of the labels.

The printer is equipped with a fast processing speed, capable of producing high-quality prints at a rate of up to 6 inches per second. This efficiency is essential for high-volume printing environments, where time and productivity are critical. Accompanied by a large media capacity, the B-SX4T-QQ minimizes downtime caused by the need for frequent media replacement.

Connectivity is another highlight of the Toshiba B-SX4T-QQ. It supports multiple interfaces, including USB, serial, and Ethernet, facilitating seamless integration with existing systems and networks. This versatility makes it compatible with various operating environments, enhancing workflow efficiency.

The B-SX4T-QQ is built with durability in mind. Housed in a rugged casing, it is designed to withstand the rigors of industrial use. Its reliable performance is further enhanced by enhanced features such as a user-friendly LCD display and intuitive control panel, making operation and monitoring straightforward.

In terms of software compatibility, the printer supports multiple programming languages, including PPL and ZPL, which ensures ease of integration with various applications. This capability is particularly beneficial for businesses that require custom label designs and specific printing configurations.

Overall, the Toshiba B-SX4T-QQ is an excellent choice for businesses looking for a reliable, versatile, and high-performance industrial printer. Its combination of advanced features, robust design, and ease of use positions it as a valuable asset in any labeling operation.
Top Page Image Contents