14
English
6 Customizing
This.section. describes. the. various. setting.
option.of.this.BD.player..
If.the.setup.option.is. grayed.out,.it.means.
the. setting. cannot. be. changed. at. the.
current.state.

General Setting

1..Press.SETUP.button.on.the.remote.
control.The.Setup.Menu.appears.
System Screen Saver On
On
On
More...
More...
Language Disc Auto Playback
Playback CEC
Security Easy Setup
Network Load Default
... General Setting ...
SETUP Exit
Move cursor key to select menu option
then use “OK” key to select
2. Press to.select.an.option,.then.press
.to.access.
3. Press / to.select.a.setup.option.and
press ..
4. Select.the.setting.you.wish.to.change
and press OK to conrm.
- Press to.return.to.the.previous.menu.
[System]
To.change.the.following.system.option.to.
personalize.your.BD.player.
• [Screen Saver]
Turn.On.or.Off.the.screen.saver.mode.
It.helps.to.protect.the.TV.screen.
{.On.}.–.Set.the.screen.saver.active.
after.approximately.10.minutes.with.no.
operation.
-.The.BD.player.will.switch.to.standby.
mode.if.there.is.no.operation.after.the.
screen.saver.is.engaged.for.
approximately.10.minutes.
{.Off.}.–.Turn.off.the.screen.saver.
mode..
• [Disc Auto Playback]
Turn.On.or.Off.the.disc.automatic.
playback.switching.mode.
{On}.–.The.disc. playback.automatically.
after.loading.
{Off}.–.Turn.off.disc.auto.playback.
mode.
• [CEC]
This.player.supports.REGZA-LINK.which.
uses.the.HDMI.CEC.(Consumer.
Electronics Control) protocol. You can
use.one.single.remote.control.to.control.
all.REGZA-LINK-compliant.devices.that.
are.connected.through.HDMI.connectors.
{On}.-.Turns.on.REGZA-LINK.features.
-With.CEC.on,.during.TV.standby.with.
the.BD.player.on,.pressing.SETUP,.PLAY/
PAUSE.will..power.on.the.TV.
{Off}.-.Disables.REGZA-LINK.features.
• [Easy Setup]
Re-congure some settings. It is the same
as "Load Default" of steps 4-8.
Tip:
For seng osd and TV resoluon and TV aspect.
• [Load Default]
Reset.all.settings.of.BD.player.to.initial.
default.state.
-.Follow.the.instruction.on.the.TV.screen.
to conrm the default setting operation.
1..Select.Load Default.
2..A.dialogue.box.pops.up.shown.as.
below..Select.OK..
Load Default
Cancel
Do you want to load default?
OK
3.It.may.take.awhile.when.loading.
default.is.in.progress..Please.wait...
Load Default
30%
Loading default, please wait...
4..TV.will.display.as.follow:
Welcome
OK Next
to the Toshiba BD Player Setting Wizard.
Some simple settings are suggested before you
begin. You can also access detailed settings
from the Setup Menu.
5. Press OK, enter language setting...Press.OK,.enter.language.setting..
Press/ to.select.a.language.option.
Choose
Previous
an OSD language before starting.
The language selected will be applied not only
here but also in other OSD windows, menus
etc.
OK Next
Français
Español
EnJlish