Memory Card Option Board (350016) | - Slot 5 (from back) |
Diskless Rom Bd. (281164) | - Slot 4 |
Thermal Control Bd. (351105) | - Slot 2 |
Head Control Bd. (351106) | - Slot 1 |
TCB Dip Switch S2 Settings
TCB DIP SWITCH S2 SETTINGS
1 | DPI | OFF = 240 | ON = 300 |
2 | DPI (Undefined) | OFF = Default | ON = |
3 | MACHINE TYPE | OFF = 656 | ON = 636 |
4 | MACHINE TYPE (Undefined) | OFF = Default | ON = |
5 | JAM SENSOR | OFF = not installed | ON = installed |
6 | UNDEFINED | OFF = Default | ON = |
7 | UNDEFINED | OFF = Default | ON = |
8 | UNDEFINED | OFF = Default | ON = |
Installing the Power Cord
A power cord is shipped with each printer. The cord for 110 volt printers, will use the standard three prong plug used in the U.S.A. A 220 volt printer and other 110 volt configurations must have the receptacle end of the connector removed and the proper plug installed. It is the customers responsibility to have the plug and alteration work done by a certified electrician. Paxar supplies printers to many countries with many variations. Therefore we leave this to the customer to make the proper selection for their country.
8 • Printer Setup | Users Manual Model 656/636 |
