HOME SCREEN
READY FOR BATCHES
IMAGER VXX . XX
| OR |
|
|
BATCH ID | QTY |
PCL001 | 000000010 |
When the printer is powered up and all initializations are complete, and if there are no Batches to print, the HOME screen will be “READY FOR BATCHES" and the A.T. code version number (IMAGER VXX.XX) will be displayed.
When at the "READY FOR BATCHES" screen, and the HOST is mapping, the screen will display :
BUILDING IMAGE
IMAGER VXX . XX
When at the "READY FOR BATCHES" screen and there are no batches and the "ENTER" key is held down the screen will display the last batch printed (if any).
LAST BATCH WAS XXXXXXX
IMAGER VXX . XX
When there are Batches to be printed the HOME screen will be "BATCH ID QTY" screen, the Batch ID / Batch Qty screen will display the currently cutting batch ID and labels left to cut.
If the printer is performing a FEED or a TEST pattern this screen will show "FEEDING" or "PRINTING TEST PATTERN" respectively on line two.
PAXAR 656/240
IMAGER VXX . XX
This is the MACHINE ID screen. This screen shows the machine model - (656 or
636)and the print head type - (240DPI or 300 DPI). This screen will momentarily appear whenever the EXIT / Up arrow is pressed, and there are batches to be printed.
After this momentary display, the "HOME" screen is again displayed. Pressing the MODE / Down Arrow key will take the user to the next screen. Pressing the EXIT / Up Arrow key will take the user back to the HOME screen.
22 • Control Panel Operation | Users Manual Model 656/636 |
