4.25” Stacker Specifications
•4.25” Web x 1 ¾” Feed
•Will work on 636, 656 & 676
•Old machines may require the knife strut to be replaced with one that has a mount hole – Part number 355018.
•Fabric and heat seal only - not for pressure sensitive or tags.
•Stack height dependent on material size and weight. (may not reach full stacker height)
•Jam sensor will require relocating the LED to the center position for the 676 and back set of holes for the 636 & 656.
•If changing from standard stacker to 4.25” stacker - the knife guard must be changed to match the stacker being used.
Users Manual Model 656/636 | Optional Stackers • 99 |
