Toshiba BDX2000KU Software Update, One Touch Play, Buttons for one touch play Play B, Standby

FUNCTION SETUP

Setting items			Options
Network Connection	Enable(Custom)	Proxy	Do Not Use*		Set the proxy server.
		Setting			In most cases, you can
			Use	Proxy
				Address	connect to the Internet
					without using proxy server.
				Proxy Port
		Connection	Auto*		Set the connection speed.
		Speed			In most cases, you can
			10BASE Half
					connect to the Internet
			10BASE Full
					without making any changes
			100BASE Half
					to the default setting.
			100BASE Full
		BD-Live	Allow*		You can restrict Internet
		Setting			access when BD-Live
			Limited Allow
					functions are used.
			Prohibit
		MAC Address			You can check the MAC
					address.
	Disable				Deactivate the network
					connection.
Software Update	Current Version:
Allows you to update this unit’s	Indicates the current firmware version.
firmware. Refer to page 49.
	Disc Update:		No*
	Allows you to update this
	unit’s firmware using a disc.
			Yes

HDMI CEC (REGZA - LINK)

You can control all HDMI CEC compatible components connected via an HDMI cable by simple button operations of the remote control of this unit. In order to enable the function, you need to set “HDMI CEC” to “On”.

One Touch Play

When the operations with following buttons of the remote control of this unit are performed, the TV will automatically be turned on and switched to the appropriate input channel.

Buttons for one touch play:

-[PLAY B]

-[TOP MENU] or [POP MENU / MENU] (when a disc is inserted in the unit)

Standby

When you press and hold [ON/STANDBY Q] for 2 seconds, it turns off the power of the TV first and then turns off the power of this unit.

When the connected HDMI CEC compatible display device is turned off, this unit may also turn off together.

System Information

Get & Set Menu Language

The unit recognizes the OSD language set for the TV and automatically sets the same language as the player menu language (OSD menu language) for this unit.

•This feature is available only when “Auto(XXXX)” is selected in “Player Menu” in the setup menu. (Refer to “Player Menu” on page 35.)

Receiving operational signal from TV’s remote control:

You can operate this unit with TV’s remote control. Check your TV owner’s manual for details.

•This function may not work properly depending on the connected TV.

•The available operation may differ depending on the TV’s remote control you use.

•Other components must be compatible with HDMI CEC in order to use this function.

INTRODUCTION CONNECTIONS

PLAYBACK FUNCTION SETUP OTHERS

EN 45