Toshiba BDX2500KU owner manual Usb

Wireless Network Connection (Need the optional Wi-Fi unit of sold separately)

Your Blu-ray disc player can also be connected to network with a Wireless access point.

1.A wireless AP/IP router is required to make a wireless network connection. Connect the wireless LAN adapter to the USB port on the rear panel of the Blu-ray Disc Player, and set the wireless network options (See Step 2 ~ 3).

2.After the Wi-Fi device inserts to USB terminal, press / to select “Network” from Settings, and press OK to enter.

3.Press / to select “Wireless”, and press OK to enter.

(For detailed information, please refer to the user guide for WLM-10UB1.)

Wired

Wireless

Network Test

AC IN

			COMPONENT VIDEO OUT			SBl	C	Sl	Fl
			Y	P	P
						SBR	SW	SR	FR
	USB HDMI OUT	BITSTREAM / PCM	R	l	VIDEO	MUlTI CHANNEl AUDIO OUTPUT
lAN		OPTICAl	AUDIO OUT		OUT

Connections

USB

Wireless access point

Modem Port

Wireless LAN

Adapter

Modem Cable

Notes:

•This unit is compatible with TOSHIBA’s Wireless LAN Adapter only. Model name: WLM-10UB1

•You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for stable operation of the wireless network.)

•Wireless LAN, in its nature, may cause interference, depending on the use condition (AP performance, distance, obstacle, interference by other radio devices, etc.).

•Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.

•When applying the security key for the AP (wireless IP sharer), only the following is supported.

1)Authentication Mode : WEP, WPAPSK, WPA2PSK

2)Encryption Type : WEP, TKIP, AES

15