Toshiba D-R17DTKB owner manual Manual Tuning DVB, To Select a Channel, Edit Channels, 26 EN

Follow steps 1 to 3 in “Auto Tuning (DVB)” on page 25.

Select “Manual Tuning” using

[U / D], then press [ENTER/OK].

23_31_BasicSetup_EN.fm Page 26 Tuesday, July 17, 2007 1:14 PM

Manual Tuning (DVB)

DVB

You can preset a DVB channel manually and individually.

1

2

3 Select your desired position number using [U / D], then press [ENTER/OK].

Manual Tuning (DVB)

ChannelAuto

•The tuner will begin to search up or down automatically. When a DVB channel is found, the unit will stop searching.

•When “Auto” is selected the unit will search for the channels which have not been stored in channels memory.

4 Press [GREEN] to activate the setting.

To Select a Channel

You can select memorised channels by using [PROG. / ]. For DVB channels you can use the favourite lists (TV1-TV4) to loop channels only within the favourite list. (See “TV Title List” on page 27.) You can select a channel using [PROG. / ], or directly enter the channel using [the Number buttons] on the remote control.

Notes on using [the Number buttons]:

•For one or two digit number channels, the channels will be identified 2 seconds after you press the channel number, or right after you press [ENTER/OK]. For example, if you want to select channel 6, press [6] and wait for 2 seconds or press [ENTER/OK]. You can only select channels 1 to 999.

•Analogue channels will be stored in channel 901- 999 and DVB channels will be stored in channel 1- 900 after it is scanned by this unit.

To switch DVB, analogue and external input (AV1/ AV2/AV3) mode.

You can switch between DVB, analogue and external input (AV1/AV2/AV3) mode by pressing [INPUT SELECT ] repeatedly. The mode changes as follows:

DVB mode Analogue mode AV1 AV2 AV3

•You can also switch the mode by using [PROG. / ].

•You cannot select any DVB channels using

[the Number buttons] when you are in analogue or external input (AV1/AV2/AV3) mode.

•You cannot select any analogue channels using [the Number buttons] when you are in DVB mode.

Edit Channels

With the EDIT CHANNELS screen, you can see all memorised DVB channels, create favourite lists, and set the viewer limitation to channels (Adult lock).

To display EDIT CHANNELS screen, after following steps 1 to 3 in “Auto Tuning (DVB)” select “Edit Channels” using [U / D], then press [ENTER/OK].

Guide to EDIT CHANNELS screen

	EDIT CHANNELS
	#		NAME		1		2	3	4
	1		Channel1			1	2		4
	2		Channel2			1		3
1	3	L	Channel3			1	2	3
			Channel4			1
	5		Channel5
	6	L	Channel6
	7		Channel7
	8		Channel8
					TV LIST
					ADULT		LOCK
		2	3	4				5

1Channel numbers.

2Appears when the channel is locked for the Adult Lock.

3Channel names.

4Type of displayed TV title list.

5Indicates the registered favourite list number for the channels.

The EDIT CHANNELS screen consist of list of the all memorised DVB channels (TV LIST), and four favourite lists (TV1 - TV4). You can switch between those channels by pressing [GREEN] repeatedly.

CH List	Favourite	Favourite	Favourite	Favourite
(TV List)	List	List	List	List
	(TV 1)	(TV 2)	(TV 3)	(TV 4)

• If the favourite list does not have any channels, the

list will be skipped.

• If there are more than one page of the CH List (TV

List) or the favourite list (TV1 -TV4), you can turn the

pages by using [L / P].

Note

• You cannot select “Edit Channels” when you are in

analogue, or external input (AV1/AV2/AV3) mode.

• If you execute the Auto Tuning for DVB channels,

the setting in the EDIT CHANNELS screen will be

cleared.

26 EN