Toshiba D-R17DTKB Marker Setup, Chasing Playback during Recording, Press Play B during recording

E7J70BD_EN.book Page 55 Monday, May 7, 2007 3:31 PM

3 Select the desired zoom position using [U / D / L / P], then press [ENTER/OK].

Zoom playback will start.

Hint

•To exit the zoom menu, press [ZOOM] at step 1.

•To cancel the zoom function, select “x1.0” using [U / D], then press [ENTER/OK].

Note

•If selecting a smaller factor than that currently selected, the zoom area is not displayed.

•You cannot slide the zoomed picture on some JPEG files.

Marker Setup

Video	VR
DVD-V DVD-RW	DVD-RW DVD-R

DVD+RW DVD+R CD VCD

(PBC OFF)

You can assign a specific point on a disc to return later.

1 During playback, press [DISPLAY].

2 Select the icon using [L / P], then press [ENTER/OK] within 1 second, or wait for 1 second to display the marker list.

Marker setup menu for DVD-Video

1/ 5 1/ 5 0:01:00 / 1:23:45

DVD Video

1---

2---

3---

4---

5---

6---

3 Select the desired marker number using [U / D]. When the disc reaches the desired point, press [ENTER/OK].

The title (track) number and the time are displayed.

4 To return to the marker, select the desired marker number using [U / D], then press [ENTER/OK].

Hint

•To clear a marker, select the marker number you wish to clear, then press [CLEAR].

•You can mark up to 6 points.

Note

•All markers are erased when you perform the following operations.

-Open the disc tray.

-Turn off the power.

-Record on a recordable disc.

-Change the mode between Original and Playlist. (VR mode)

Chasing Playback during Recording

VR

DVD-RW

You can play back the already recorded part of the currently recording programme without waiting for the recording to the end. This function works from 1 minute after the start of the recording.

Make sure to use a DVD-RW disc in VR mode, and the recording mode is set to LP, EP or SLP.

1 Press [PLAY B] during recording.

Playback will start from the beginning of the programme that you are currently recording. Screen for the current playback:

1/ 5 1/ 5 0:01:00 / 1:23:45

-RW VR ORG

If you play the fast forward playback and the playback reaches the scene recorded 1 minute before, the forwarding playback will automatically return to the normal playback.

2 To stop the playback, press [STOP C] once.

The resume message will appear.

Screen for the current recording:

1/ 5 1/ 5 0:01:00 / 1:23:45

-RW VR ORG

901

Resume ON LP 1:01

To stop recording, press [STOP C] again.

To cancel the resume, press [STOP C] again.

Introduction Connections Basic Setup Recording

Playback

Editing Function Setup Others

EN 55