E6581295⑥
■Wiring
Danger
Mandatory
▼Shut off power when installing and wiring this option.
Wait at least 15 minutes and check to make sure that the charge lamp
▼Tighten the screws on the terminal block to the specified torque (Refer to Section 4.1). If the screws are not tightened to the specified torque, it may lead to fire.
▼Electrical construction work must be done by a qualified expert.
Installation or connection of input power by someone who does not have that expert knowledge may result in fire or electric shock.
■Operations
Danger
Prohibited
▼Do not touch switches when the hands are wet and do not try to clean the inverter with a damp cloth.
Doing so could result in electric shock.
▼Do not pull on any cable itself.
Doing so could result in damage or malfunction.
■Disposal
Warning
Mandatory
▼For safety's sake, do not dispose of the disused inverter yourself but ask an industrial waste disposal agent (*).
If the collection, transport and disposal of industrial waste is done by someone who is not licensed for that job, it is a punishable violation of the law. (Laws in regard to cleaning and processing of waste materials)
(*) Persons who specialize in the processing of waste and known as “industrial waste product collectors and transporters” or “industrial waste disposal persons.”
Notes on use
Notes
▼Do not install the inverter where the temperature or the humidity will change rapidly.
▼Keep a distance of 20cm or more between the inverter's power cable and the data transmission cable.
Or the inverter might malfunction because of noise.
▼Insert a magnetic contactor or similar device between the inverter and the power supply to ensure that power is turned off if an emergency stop command is entered through the network.
- 3 -
