The Basics
Making a Call
Which Outgoing/Incoming Call Features Do I Have?
Check mark here which outgoing/incoming features you have on your system.
❐Tone Signaling: Internal incoming call – you hear successive ring tones, then lift
the handset to answer the call. On the DKT3001 (in DKT3001 mode, you can also press 6SNU to answer the call).
❐Voice First Signaling: Internal incoming call – your phone does not ring; instead you hear a long tone, then the caller’s voice. Answer the call by lifting the handset. This feature does not work on the DKT2001.
❐Hot Dialing: If your telephone is programmed for “hot dialing,” you do not have to press 6SNU or lift the handset before dialing internal or external speakerphone calls. When you dial a number, the speakerphone automatically turns on and the Spkr and Line LEDs light. This feature does not work on the DKT2001.
Making a Call
There are three ways to originate a call from a digital telephone:
Hot Dialing
1.To make a call using Hot Dialing, begin by dialing the number.
2.When you dial, the Spkr and Line LEDs light. Dial tone plays through the speaker. Call progress tones (Ringback Tone, Busy Tone, etc.) play through the speaker.
3.When connected, lift the handset to continue the conversation.
❐ DKT2001: This feature does not work.
Spkr Button
1.To make a call, press 6SNU.
Your extension or /LQH button lights (depending on system programming). Dial tone plays through the speaker. The Spkr and Mic LEDs light.
2.Dial the number.
Call progress tones (Ringback Tone, Busy Tone, etc.) play through the speaker.
3.When connected, lift the handset to continue the conversation.
❐ DKT2001: This feature does not work.
6 | Strata CTX DKT3001/2001 Digital Single Line Telephone 01/02 |
