Hardware, Utilities and Options

1.In Windows 7, open the Safely Remove Hardware and Eject Media icon on the system tray and disable the inserted memory card.

2.Gently press the memory card inside the socket to eject it.3.Grasp the card and remove it.

1.THE MEMORY CARD*

*THE CARD’S SHAPE DEPENDS ON THE CARD YOU PURCHASED.

Figure 3-3 Removing the inserted memory card

■Make sure the Bridge media slot indicator is out before you remove the memory media or turn off the computer’s power. If you remove the memory media or turn off the power while the computer is accessing the memory media, you may lose data or damage the media.

■Do not remove the memory media while the computer is in sleep or hibernation mode. The computer could become unstable or data in the memory media could be lost.

■Do not remove only the miniSD/microSD Card while leaving the adapter in the Bridge Media slot.

Additional battery pack (6 cell)

You can increase the portability of the computer with additional battery packs. If you’re away from an AC power source, you can replace a low battery with a fully charged one. See Chapter 6, Power and Power-up Modes.

Additional AC adapter

If you frequently transport the computer between different sites such as your home and office, purchasing an AC adapter for each location will reduce the weight and bulk of your carrying load.

User’s Manual

3-18