Troubleshooting

i.LINK (IEEE1394) device

 

 

 

 

 

Problem

Procedure

 

 

 

 

i.LINK device does not

Check that the cable connecting the external

 

function

device to the computer is firmly attached.

 

 

 

 

 

Check to ensure that power is being supplied to

 

 

the device and that the device is turned on.

 

 

 

 

 

Reinstall the drivers required for the device - this

 

 

can be achieved by clicking Start, Control

 

 

Panel, Hardware and Sound and then clicking

 

 

the Add Hardware icon at the left-hand side of

 

 

the screen and following the on-screen

 

 

instructions.

 

 

 

 

 

Restart the computer and the Windows

 

 

operating system to re-initialize the device.

 

 

If you are still unable to resolve the problem,

 

 

contact your reseller, dealer or service provider.

 

 

 

Video Playback

 

Problem

DVD does not play smoothly when using the Windows Media Center of the DVD playing software

Procedure

Try setting the configuration in the BIOS setup. However, note that when the BIOS setup configuration is modified, the power saving function of PCI Express becomes disabled. Refer to Chapter 7, HW Setup & BIOS Setup for more information.

Set the PCI Express Link ASPM in the BIOS setup using the following steps:

1.Press the F1 key. The BIOS setup screen will appear.

2.Set the PCI Express Link ASPM to Disabled in BATTERY.

3.Press the END key. A confirmation message will appear.

4.Press the Y key. The BIOS setup will terminate and the computer will reboot.

If you are still unable to resolve the problem, contact your reseller, dealer or service provider.

User’s Manual

10-24