Toshiba HD-C26H manual 33

8. When download is completed, the receiver will reboot automatically. You can now exit HyperTerminal.

9. After the receiver is booted up, you will see a message window informing you that the receiver’s database is empty. Note that the password will also be reset to the default “0000”. Now press the “MENU” button and select your region of residence.

10. On the Main Menu, select “PROFILE” and then “INFORMATION” to confirm the current software is indeed changed to the new one. You can then proceed to tune your receiver by following “INSTALLATION” instructions on page 29.

Over time, Automatic Software Upgrade service will be available as broadcasters transmit new software of your receiver. It is recommended to carry out the software upgrade so that the receiver is equipped to perform better.

1. When a new version of software for Toshiba HD- C26H is found, an OSD appears prompting for a software upgrade.

2. Press the “ENTER” button to accept the software upgrade or the “EXIT” button to cancel.

3. If the software upgrade has been accepted, the system will be rebooted. Upon startup, downloading of the new software will take place. Progress is shown on the front panel display with an “OTA” and a running line.

4. The downloading process usually takes a short while and when it has completed, the system will reboot again. Upon the second startup, the system has completed the upgrading process and the database will be empty as default. Then proceed with the Installation process. (Refer to page 29)

FUNCTIONS

33