TIME SETUP

1. Highlight “TIME SETUP” and press the “ENTER” button.

2. Select your time zone according to the region you are residing in.

For Australia:

Use the “◄” and “►” buttons in TIME ZONE to select the local time zone you are located in.

Use the “◄” and “►” buttons in SYNC ON STANDBY to select whether to let the receiver to synchronize time with the broadcaster if it is in standby mode.

For other region:

Use the “◄” and “►” buttons in LOCAL TIME to set your local time. The GMT will change accordingly. Use the “◄” and “►” buttons in SYNC ON STANDBY to select whether to let the receiver to synchronize time with the broadcaster if it is in standby mode.

Notes: The SYNC ON STANDBY function will boot the receiver from its standby mode to synchronize time information with the broadcaster so as to eliminate the time drifting. It is preset to perform the synchronization at 3 A.M. provided that the receiver is in standby mode at 3 A.M.

EXT CONTROL

For details of controlling the HD-C26H receiver by an external device connected via the RS-232 serial port,

consult your local dealer.

FUNCTIONS

37