QUICK SCAN (For Australia Only)
The “QUICK SCAN” feature allows you to scan all predefined digital TV and Radio channel signals in Australia.
1. On the installation page, highlight “QUICK SCAN” and press the “ENTER” button.
2. Use the “▲” and “▼” buttons to highlight the city you live in and press the “ENTER” button to start scanning.
3. It will scan through respective RF channels available in your city.
4. Once a digital TV/Radio channel is found, the channel number and programs names in this channel will be shown.
5. When you see the message “>>> SCAN COMPLETE <<<”, you have completed tuning your receiver. If no channel is found, refer to “TROUBLESHOOTING” in Appendix 2.
6. Press the “EXIT” button several times to leave the Main Menu.
Notes:
1.The frequencies of the “quick scan” channels are preset in the receiver’s database. In case that the local TV/Radio station changes the channel frequency or a new channel comes up, you have to scan these channels using “MANUAL SETUP”.
2.Receiver is defaulted to TV mode instead of Radio mode after QUICK SCAN.
AUTO SCAN (For Australia Only)
The “AUTO SCAN” feature allows you to scan all predefined digital TV and Radio channels in Australia. The steps required to automatically program the receiver are outlined as below:
1. Highlight “AUTO SCAN” and press the “ENTER” button to start channel search.
2. The receiver starts scanning from channel 2 to channel 69. The status bar shows the progress being made.
3. Once a digital TV/Radio channel is found, the channel number and program name will be shown.
4. When you see the message “>>> SCAN COMPLETE <<<”, you have completed tuning your receiver. If no channel is found, refer to “TROUBLESHOOTING” in Appendix 2.
5. Press the “EXIT” button to leave Main Menu.
Notes:
1.Auto scan process may take about 18 minutes to complete.
2.Receiver is defaulted to TV mode instead of Radio mode after AUTO SCAN.
30