FP DISPLAY SETUP

1. Highlight “FP DISPLAY SETUP” and press the “ENTER” button.

2. Use the “▲” and “▼” buttons to choose between “MODE” and “DISP BRIGHTNESS”.

3. Under “MODE”, use the “◄” and “►” buttons to choose between “TIME” and “CHANNEL NUMBER”. This will change the Front Panel display information.

4. Under “DISP ON STANDBY”, use the “◄” and “►” buttons to choose between “OFF” and “ON”. This will change the Front Panel display mode in standby mode. In “ON” state, the Front Panel will show the current time in 24HR format during standby mode. While in the “OFF” state, the seven segmented LED will be off during standby.

Notes:

1.TIME mode sets the receiver’s front panel Time and Channel Display to show current time. The displayed current time is purely based on the time sent by the broadcaster of the channel you are currently viewing, which may not be accurate.

2.When the receiver is in off-air mode, CHANNEL NUMBER sets the receiver’s front panel Time and Channel Display to show the channel number sent by the broadcaster.

INFORMATION

1. Highlight “INFORMATION” and press the “ENTER” button to check hardware and software versions.

FUNCTIONS

41