To check the remaining time:

1. Once the off-timer has been set, press “SLEEP” button once.

2. Current remaining time is displayed on the screen, and then turns off after 5 seconds.

To change the off-timer:

1. Once the off-timer has been set, press “SLEEP” button once.

2. Current remaining time is displayed on the screen. Before the OSD turns off, press “SLEEP” button again within 5 seconds, and the off-timer will be changed to the next bigger off-timer value.

For example, if current remaining time is “28 min”, press “SLEEP” button again, and off-timer will be changed to “30 min”.

28 min

OFF 30 min 60 min 90 min 120 min

If current remaining time is “74 min”, press “SLEEP” button again and off-timer will change to “90 min”.

74 min

OFF 30 min 60 min 90 min 120 min

Note: When the sleep timer has only 1 minute left, an OSD “SLEEP 1 min.” will automatically appear and stay on the screen. When the sleep timer counts down to 0, the receiver automatically shuts down by itself to standby mode.

AUDIO

1. Press the AUDIO button on the remote control.

2. Use the “▲” and “▼” buttons to select the preferred audio format present in the program you are watching.

3. Press the “EXIT” button to cancel the list.

FUNCTIONS

RECALL

The “RECALL” button is used to toggle between present and previous programs

1. In the case you are viewing Program A, and then you change to Program B. You can press the “RECALL” button on the remote control to return to previous program A.

2. Press the “RECALL” button again, and the receiver will show Program B.

47