INSTALLING THE RECEIVER

Follow steps A to C below. Your receiver will be ready to display digital programs on your TV.

STEP A: CONNECTIONS

DO NOT PLUG THE RECEIVER INTO THE MAINS YET.

Before you use this receiver, it is necessary to connect it to your TV.

1 CONNECTING TO TV

1-1.Connection to Antenna

Disconnect the antenna cable from your TV and connect it to the “ANT. IN” terminal on the back of the receiver.

1-2.“RF OUT” Connection to TV or VCR

This “RF OUT” provides you a RF loop-through function to receive analogue TV programs as well as digital programs. Use an RF coaxial cable (not supplied) to connect the HD-C26H “RF OUT” terminal to TV’s or VCR’s antenna input.

Before connecting or disconnecting the antenna cable, unplug the receiver, VCR, TV and antenna booster, if any.

TV

HD-C26H

￿￿￿￿￿￿￿

￿ ￿ ￿ ￿ ￿ ￿

￿ ￿ ￿ ￿ ￿ ￿￿￿

Cable Antenna Supplied) (Not

To TV antenna input

RF coaxial cable

(not supplied )

 

16