Page 6

INTRODUCTION

It is the intent of this manual to provide a guide for safely installing, operating and maintaining Toshiba vacuum circuit breakers. This manual consists of a section of general safety instructions and is marked throughout with warning symbols. Read this manual thoroughly before installation, operation and maintenance of this equipment.

This manual and all accompanying drawings should be considered a permanent part of the equipment. They should be readily available for review and reference at all times. This manual is not intended to cover all details, combinations, or variations of the equipment. Always refer to drawings accompanying the equipment for additional details.

All safety warnings must be followed to ensure personal safety. General safety instructions are found on pages 1 through 3. Read and save these instructions for future reference.

Follow all precautions to attain proper equipment performance and longevity.

Dimensions shown in the manual are in metric and/or their English equivalent.

This manual is divided into major sections of interest, as follows:

GENERAL DESCRIPTION – Provides a description of the equipment, information on major components and how they function, plus rating information.

RECEIVING, INSPECTION AND HANDLING – Describes procedures for receiving, unpacking, inspecting, handling, lifting and moving the circuit breaker.

INSTALLATION – Provides information on installing the circuit breaker in the switchgear cell along with breaker racking procedures.

PRE-ENERGIZATION CHECK – Provides a checklist for preparing the equipment for energization.

OPERATION – Provides information on manual and electrical operation of the circuit breaker, circuit diagrams, operating sequence description and operation of circuit breaker optional accessories.

MAINTENANCE – Lists the basic maintenance procedures for this equipment necessary for safe and reliable operation.

DISPOSAL – Lists procedures for the safe disposal of the equipment when the service life has expired.

STORAGE – Provides guidelines for storing new equipment for an extended period of time.

SPECIFICATIONS – Covers ratings and other specifications of the circuit breaker.

WARRANTY AND LIMITATION OF LIABILITY – Details Toshiba International Corporation’s standard warranty terms.

Page 9 Page 11
Page 10
Image 10
Toshiba HV6AS instruction manual Introduction
Page 9 Page 11

HV6AS specifications

The Toshiba HV6AS is a sophisticated high-voltage IGBT (Insulated Gate Bipolar Transistor) module, primarily designed for demanding applications in industrial and energy sectors. This module stands out due to its superior performance characteristics, which allow it to handle high voltages while delivering optimal efficiency and reliability.

One of the key features of the HV6AS is its high voltage rating, typically around 650V, making it suitable for various applications including motor drives, renewable energy systems, and UPS (Uninterruptible Power Supply) systems. This voltage capacity enables the module to effectively control large power loads, ensuring excellent performance in high-demand environments.

The HV6AS adopts cutting-edge technologies that improve its operational efficiency. The design incorporates advanced thermal management features, which help in enhancing its reliability and lifespan. Integrated with a robust heat sink, the module efficiently dissipates heat generated during operation. This is crucial as increased temperatures can lead to reduced performance and potential failure.

Additionally, the HV6AS utilizes a double-sided cooling structure, which allows for superior thermal conductivity and enables the module to perform optimally in high-temperature conditions. This aspect is particularly important for applications in renewable energy, such as solar inverters, where efficiency and durability are key.

Another notable characteristic of the HV6AS is its fast switching capability. The IGBT technology allows for rapid switching between on/off states. This feature is essential in applications such as pulse-width modulation (PWM), contributing to improved power conversion efficiency. The high switching frequency capability means that systems can operate more efficiently, resulting in lower energy losses.

Toshiba’s HV6AS also focuses on enhancing productivity through simplified circuit design. Its compact form factor means that it can be easily integrated into existing systems, saving space and simplifying installation processes. The module’s compatibility with existing drive technologies allows for seamless upgrades to newer systems without significant changes to the overall architecture.

In summary, the Toshiba HV6AS is a highly versatile IGBT module characterized by its high voltage capability, advanced thermal management, fast switching speed, and compact design. These factors make it an excellent choice for a wide array of high-performance applications in various industries, driving innovation towards more efficient and sustainable power solutions. Whether in industrial automation or renewable energy, the HV6AS sets a benchmark for reliability and effectiveness in power electronics.
Top Page Image Contents