Toshiba IK-WB16A-W user manual When using a PoE-enabled switch

Set up the Network Camera through Power over Ethernet (PoE) (IK-WB16A only)

When using a PoE-enabled switch

The Network Camera is PoE-compliant, which allows it to be powered via a single Ethernet cable. If your switch/router supports PoE, refer to the following illustration to connect the Network Camera to a PoE-enabled switch/router.

1 2 3 4

microSD

power + data transmission

PoE Switch

(Not supplied)

When using a non-PoE switch

If your switch/router does not support PoE, use a PoE power injector (not supplied) to connect between the Network Camera and a non-PoE switch/router.

1 2 3 4

microSD

PoE Power Injector

(Not supplied)

Non-PoE Switch

(Not supplied)

21