SMART Information
The SMART Information tab displays Hard Drive information.
SMART Alert
1.Setup the General and Users tabs first. (see above)
2.Select the Enable SMART Alarm.
3.Define the number hours between SMART checks.
4.Select the type of SMART event to trigger an action.
5.Define the maximum HDD temperature.
6.Select an action method.
7.Click Apply.
Alarm Event
1.Setup the General and Users tabs first. (see above)
2.Select the Use Email Alarm check box.
3.Define the number of minutes between recording data checks.
4.Select Motion and/or Sensor to send and alert on that type of event.
5.Click Apply.
6.Click Close to return to the Administration tab.
57
