Toshiba L300, L300D Wireless LAN, Recovery discs, LAN, Chapter 4, partition.”, appears when, Disc Creator, administrator, launched because, executing Recovery

L300/L300D series

Wireless LAN

If the following procedures do not restore LAN access, consult your LAN administrator. For more information on wireless communication, refer to

Chapter 4, Operating Basics.

Problem	Procedure
Cannot access Wireless Make sure the computer’s wireless
LAN	communication switch is set to on.
	If problems persist, consult your LAN
	administrator.

Recovery discs

Problem	Procedure
The following message	You will see this message if you have previously
appears when	chosen to remove the partition and are trying to
executing Recovery	create “Recovery Media”. When there is no
Disc Creator.	recovery partition, the Recovery Disc Creator
“The Recovery Disc	cannot make Recovery Media.
Creator can not be	However, if you have already created a
launched because	“Recovery Media”, you can use it to restore the
there is no recovery	recovery partition.
partition.”	Simply follow the instructions in “Restoring the
	preinstall software from your creating Recovery
	Media” section in this manual. You will be
	directed to select “Restore Original Factory
	Image” from the drop-down menu. If you have not
	created “Recovery Media”, please contact
	TOSHIBA support for assistance.

9-16 User’s Manual