Toshiba L310 user manual Lan

Troubleshooting

	Problem	Procedure
	Communication is cut	The computer will automatically cut off
	off unexpectedly	communication when connection with the carrier
		is not successful for a set time interval. Try
		lengthening this time interval.
	A CONNECT display is	Check the error control setting in your
	quickly replaced by NO	communications application.
	CARRIER	You can also use the AT\N command.
	Character display	In data transmission, make sure the parity bit and
	becomes garbled	stop bit settings correspond with those of the
	during a communication	remote computer.
		Check the flow control and communication
		protocol.
	You cannot receive an	Check the rings before auto answer setting in
	incoming call	your communications application.
		You can also use the ATS0 command.
		If problems persist, contact your dealer.
LAN

Problem	Procedure
Cannot access LAN	Check for a firm cable connection between the
	LAN jack and the LAN hub.
	If problems persist, consult your LAN
	administrator.

Wireless LAN

If the following procedures do not restore LAN access, consult your LAN administrator. For more information on wireless communication, refer to Chapter 4, Operating Basics.

Problem	Procedure
Cannot access	Make sure the computer's wireless
Wireless LAN	communication switch is set to on.
	If problems persist, contact your LAN
	administrator.

The Wireless LAN feature is not available on all models.

9-20 User’s Manual