Operating Basics
■It is necessary to register the User Password before using the fingerprint
■If you fail fingerprint authentication more than five times, you must enter the User Password or Supervisor Password manually to start the computer.
■When swiping, please do it slowly and at a constant speed. If this does not improve the authentication rate, please adjust the speed.
■If there are any changes in the environment or settings related to authorization, you will be required to provide authorization information such as a User Password and HDD password.
How to enable fingerprint system boot authentication settings
It is necessary to first enroll your fingerprint with the TrueSuite Access Maganer application prior to enabling and configuring the fingerprint Pre- OS feature.
Check that your fingerprint is enrolled before configuring the settings.
1.Swipe your finger across the fingerprint sensor. Or enter Windows password and click Next.
2.Click settings.
3.The Administrator Settings screen is displayed. Place a checkmark in “Enable
The modified configuration for fingerprint
Fingerprint Single Sign-On feature
General
This is a feature that allows the user to complete the authentication for both the User Password (and optionally, the HDD user and Supervisor passwords) and logging on to Windows using only one fingerprint authentication when booting up. It is necessary to register the User Password and Windows Logon password before using the fingerprint Pre- OS feature and this fingerprint Single
Only one fingerprint authentication is required to replace the User Password (and, if selected, the HDD user and Supervisor passwords) and Windows Logon password.
User’s Manual |
