Toshiba M750, PPM75U0QM02R eSATA device

PORTÉGÉ M750

Problem	Procedure
External devices	Some external devices may not work when
connected to the	connected to a compatible port when the “USB
compatible ports do	Sleep and Charge function” is [Enabled].
not work when	Reconnect the external device after turning ON
connected to a
	the computer.
compatible port.
	If the external device still does not work, connect
	device to an USB port that does not have the
	USB Sleep and Charge function-compatible icon
	( ) or change the “USB Sleep and Charge
	function” setting to [Disabled].
The “USB WakeUp	When “USB Sleep and Charge function” is set to
function” does not	[Enabled], the “USB WakeUp function” does not
work.	work for ports that support the USB Sleep and
	Charge function.
	In that case, use an USB port that does not have
	the USB Sleep and Charge function-compatible
	icon ( ) or change the “USB Sleep and Charge
	function” setting to [Disabled].

eSATA device

In addition to the information in this section, please also refer to the documentation supplied with your eSATA device.

Problem	Procedure
eSATA device does not	Remove the eSATA device from the computer
work	and then reconnect it to a free port it in order to
	ensure it is firmly attached.
	A connected eSATA device may not be
	recognized if it is connected to the computer’s
	eSATA/USB combo port while the computer is in
	Sleep Mode or Hibernation Mode. If this occurs,
	disconnect the eSATA device and then reconnect
	the device while the computer is turned on.
	Ensure that any required eSATA device drivers
	are properly installed - to achieve this you should
	refer to both the device documentation and the
	operating system documentation.
	If you are still unable to resolve the problem,
	contact your reseller, dealer or service provider.

8-18 User’s Manual