PORTÉGÉ M750

Tabs

Keyboard

 

Screws

Figure 3-13 Replace the keyboard

14.Set the keyboard brace into its groove and hold down to secure the latches.

15.Install the battery pack. Refer to Replacing the battery pack section in Chapter 6, Power and Power-Up Modes, for details.

16.Turn your computer over.

17.Turn the computer on and make sure the added memory is recognized - to confirmed it, Start -> Control Panel -> System and Maintenance -> System icon.

Removing a memory module (Slot A)

The slot A is reserved for main memory. Use the slot B for expanded memory. If only one card is installed, use the slot A.

To remove the memory module, follow the steps as detailed below:

1.Set the computer to Boot Mode and turn its power off - make sure the Power indicator is off (refer to the Turning off the power section in Chapter 1, Getting Started, if required).

2.Remove the AC adaptor and all cables and peripherals connected to the computer.

3.Turn the computer upside down and remove the battery pack (refer to Replacing the battery pack section in Chapter 6, Power and Power-Up Modes, if required).

4.Follow steps 4 through 9 in Installing a memory module (Slot A) to appear the memory module.

5.Push the latches to the outside to release the memory module. A spring will force one end of the memory module up.

3-30

User’s Manual