150
2Check the drive.
The drive letter (*) of the connected gigabeat is displayed in the drive column.
Please check it.
* The window shows the drive as being “E” as an example, but this can differ
depending on your PC.
3Set whether or not to quick format.
When a full is desired, remove the check mark from “perform a quick format”.
4Click “Format” button.
The format warning window will be displayed.
5Click “OK” of the format warning window.
Formatting will start.
When formatting is completed, the format completion window will be displayed.
6Click “OK” of the format completion window.
There will be a return to the gigabeat format window of Step 1.
7Click “Exit”.
The gigabeat format window will go off.
/Note
-If firmware data hasn’t been restored, also restore firmware data. (>p.149)
-If the gigabeat is formatted by the gigabeat format from the beginning, firmware
data is not deleted. So, you don’t have to restore firmware data.
-When browsing the gigabeat with another application (such as Windows
Explorer, etc.), formatting will not be possible.
Issue: A changed language of the gigabeat does not return to the original one.
Solution: Set the language by the following steps.
1Press the POWER button to display the MAIN MENU.
2Touch the bottom of the Plus Touch three times.
3Touch the right of the Plus Touch.
4Touch the top of the Plus Touch twice and select the item indicated
with “*”.
5Touch the right of the Plus Touch.
The Select Language menu appears.
6Touch the top or bottom of the Plus Touch and select the desired
language, then touch the right of the Plus Touch.