Toshiba USB Sleep and Charge function, Problem, function, computer, Procedure, power of the, Sleep and Charge, quickly even when, have turned OFF the

		Troubleshooting
USB Sleep and Charge function
	Problem	Procedure
	I cannot use the "USB	The setting of "USB Sleep and Charge function"
	Sleep and Charge	may be disabled.
	function"	Check the "USB Sleep and Charge" check box to
		enable this function in the TOSHIBA USB Sleep
		and Charge Utility.
		When there is a current overflow of the external
		device connected to the compatible port, USB
		bus power (DC5V) supply may be stopped for
		safety reasons. If this happens, disconnect the
		external device if one is connected. After that,
		turn the power of the computer ON/OFF to
		restore the function. If this function can not be
		still used even if only one external device is
		connected, stop using the external device
		because its current is over the acceptable value
		of this computer.
		Some external devices may not be able to use
		the "USB Sleep and Charge function." In this
		case, please try one or more of the following
		methods.
		■ Change the Power supply mode settings in
		the TOSHIBA USB Sleep and Charge Utility.
		■ Turn OFF the computer while external
		devices are connected.
		If this function can not be still used, uncheck the
		"USB Sleep and Charge" check box in the
		TOSHIBA USB Sleep and Charge Utility and
		stop using the function.
	The battery depletes	If USB Sleep and Charge function is enabled, the
	quickly even when I	computer’s battery will discharge during
	have turned OFF the	hibernation or when the computer is turned off.
	power of the	Connect the AC adaptor to the computer or
	computer	uncheck the "USB Sleep and Charge" check box

to disable this function in the TOSHIBA USB Sleep and Charge Utility.

User’s Manual 9-10