156

Toshiba Utilities

Fingerprint Authentication Utility

 

 

 

NOTE

 

If you do not use a Windows® password, you will be prompted to

 

 

define a new (non-empty) one. This is not necessary, but a password

 

 

improves the security of your software.

 

 

 

If your system supports power-on security, a Power-on button is also displayed above each enrolled fingerprint. This button is shown pressed by default, indicating that your fingerprint is automatically added for power-on authentication.

During fingerprint enrollment, the system displays icons as prompts, notifications, and warnings. These icons and their meanings are as follows:

❖Reader ready—the reader is waiting to read your fingerprint. Swipe your finger when you are ready.

❖ Reader busy—wait for the reader to complete its operation.

❖Problem with operation—the reader could not read your fingerprint. Swipe your finger again.

❖Operation succeeded—the reader successfully read or verified your fingerprint.

❖ Failed to verify the user—the fingerprint could not be matched.

❖Error reading fingerprint—the finger was too far to the left or right. Center your finger and swipe it again.

❖Error reading fingerprint—the movement was skewed. Swipe your finger again in a straight line.

❖Error reading fingerprint—the movement was too fast. Swipe your finger again at a slower speed.

❖Error reading fingerprint—the movement was too short. Swipe your finger again using a longer motion.

Fingerprint Logon

The fingerprint utility enables logon to your computer using fingerprints. During user enrollment, fingerprint samples are saved and associated with the user’s Windows® user account. When the user attempts to log on again, the user’s fingerprint is read and compared with the user’s enrolled fingerprints; if the fingerprint is recognized, user logon is completed.