68

Getting Started

Using external display devices

Configuring virtual buttons

The virtual buttons at the top of the Dual Mode Pad are pre- configured for the Email, ConfigFree, and Print functions. You can assign different functions to these buttons if you wish.

The virtual buttons on the bottom of the Dual Mode Pad (buttons 4, 5, and 6 in the Properties for Synaptics LuxPad window) are unassigned by default. In order to use one of these buttons, you must first configure that button so that it is associated with a function.

To configure a virtual button:1 Perform steps 1-5 in “Enabling Dual Mode” on page 67.2 Select the virtual button you wish to configure.3 Select the desired options, and then click OK.4 Click OK.5 Click OK to close the Mouse Properties window.

Using external display devices

Your computer comes with a built-in display, but you can also connect an external display device to an available video port, as follows:

❖An external monitor or projector via the RGB (monitor) port❖A TV, VCR, or DVD recorder via the S-video (TV-out) port**Available on certain models

Before connecting an external monitor or video projector, configure your computer for the type of device you are connecting. To do this, refer to the documentation for your operating system and devices.

Connecting an external monitor or projector

You can easily attach an external monitor or projector to your computer if you need a larger screen. To do this:

1Connect the monitor’s video cable to the RGB (monitor) port on the side of the computer.

2Connect the device’s power cable to a live electrical outlet.3Turn on the external device.

Your computer will automatically detect the external display device and activate a screen with display options.

4Select the settings you desire and click Apply.5Click OK.