PORTÉGÉ R700 / Satellite R630
DISC created in
If the disc is poor in quality, or is dirty or damaged, writing or rewriting errors may be noted - ensure that you check all discs for dirt or damage before you use them.
The actual number of rewrites to
There are two types of
You can use both
You may find that other computer
Data written to a
Data deleted/erased from a
In writing to
Since the disc is based on the DVD standard, it might be filled with dummy data if the written data is less than about 1GB. Therefore, in these circumstance, even if you write only a small amount of data, it might take additional time to fill in the dummy data.
When multiple drives that can write data to discs are connected, be sure that you do not write to or delete data from the wrong drive.
Be sure to connect the AC adaptor to the computer before you write or rewrite any information.
Before you enter either Sleep Mode or Hibernation Mode, take care to ensure that any optical disc drive writing has been completed. In this instance, writing is finished if you can eject the optical disc.
Be sure to close all other software programs except for the writing software itself.
Do not run software such as a screen saver which can put a heavy load on the processor.
Operate the computer at its full power settings - do not use any power- saving features.
User's Manual |