PORTÉGÉ R700 / Satellite R630
Connecting the monitor cable
1.Turn the computer's power off.
2.Connect the monitor cable to the external monitor port.
1
2
1. External monitor port | 2. Monitor cable |
3.Turn the external monitor's power on.
4.Turn the computer's power on.
When you turn on the power, the computer will automatically recognize the monitor and determine whether it is a color or monochrome device. In the event that you find that there are issues getting an image displayed on the correct monitor, you should consider using the FN + F5 hot key to change the display settings (if you then disconnect the external monitor before you turn the computer's power off, be sure to press FN + F5 hot key again to switch to the internal display).
Please refer to chapter 5, The Keyboard, for further details on using hot keys to change the display setting.
Do not disconnect the external monitor while in Sleep or Hibernation Mode. Turn off the computer before disconnecting the external monitor.
When displaying desktop at external analog monitor, desktop is sometimes displayed on the center of the monitor with black bars around desktop (with small size).
At that time, please read the manual of the monitor and set the display mode which is supporting at the monitor. Then it will be displayed with suitable size with correct aspect ratio.
eSATA (External Serial ATA) devices
An device corresponding to eSATA function can be connected to the eSATA/USB combo port on the computer.
Connecting the eSATA device
To connect an eSATA device, follow the steps as detailed below:
1.Connect an eSATA cable to the eSATA/USB combo port.
User's Manual |