PORTÉGÉ R700 / Satellite R630
You can also enable Sleep Mode by pressing FN + F3 - please refer to chapter 5, The Keyboard, for further details.
You can enter Sleep Mode in one of three ways:
Click Start, point to the arrow icon (
) and then select Sleep from the menu.
Close the display panel. Please note that this feature must be enabled within the Power Options (to access it, click Start > Control Panel > System and Security > Power Options ).
Press the power button. Please note that this feature must be enabled within the Power Options (to access it, click Start > Control Panel > System and Security > Power Options ).
When you turn the power back on, you can continue where you left when you shut down the computer.
When the computer is in Sleep Mode, the power indicator will blink orange.
If you are operating the computer on battery power, you can lengthen the overall operating time by turning it off into Hibernation Mode - Sleep Mode will consume more power while the computer is off.
Sleep Mode limitations
Sleep Mode will not function under the following conditions:
Power is turned back on immediately after shutting down. Memory circuits are exposed to static electricity or electrical noise.
Hibernation Mode
The Hibernation Mode feature saves the contents of memory to the hard disk drive when the computer is turned off so that, the next time it is turned on, the previous state is restored. Please note that the Hibernation Mode feature does not save the status of any peripheral devices connected to the computer.
Save your data. While entering Hibernation Mode, the computer saves the contents of memory to the hard disk drive. However, for safety sake, it is best to save your data manually.
Data will be lost if you remove the battery or disconnect the AC adaptor before the save is completed. Wait for the Hard Disk Drive/ Optical Disc Drive/eSATA indicator to go out.
Do not install or remove a memory module while the computer is in Hibernation Mode. Data will be lost.
Benefits of Hibernation Mode
User's Manual |