PORTÉGÉ R700 / Satellite R630

4.Grasp the PC Card and remove it.

Figure3-2Removing the PC Card

 

2

 

1

1

2

1. PC Card eject button

2. PC Card

5.Insert the Dummy card into the PC Card slot.

ExpressCard

Some models are equipped with a single ExpressCard slot into which any ExpressCard device that meets industry standards, either manufactured by TOSHIBA or another vendor, can be installed. The slot supports hot plug connection and utilizes the PCI Express interface that supports the reading and writing of data at a theoretical maximum rate of 2.5Gbps.

Inserting an ExpressCard

The Windows hot-install feature allows you to insert ExpressCards while the computer is turned on.

Do not insert an ExpressCard while the computer is in Sleep Mode or Hibernation Mode as you may find that some cards do not work properly.

To insert an ExpressCard, follow the steps as detailed below:

1.Press the Dummy card in order to eject the Dummy card partially out of the computer.

2.Grasp the Dummy card and draw it.

3.Insert the ExpressCard into the ExpressCard slot on the right side of the computer.

User's Manual

3-17