PORTÉGÉ R700 / Satellite R630

 

 

 

 

 

 

 

Enabled

Enables the USB floppy diskette drive legacy

 

 

emulation function (Default).

 

 

 

 

Disabled

Disables the USB floppy diskette drive legacy

 

 

emulation function.

SATA

eSATA

This feature allows you to set conditions for SATA.

Enabled

Enables the eSATA port (Default).

Disabled

Disables the eSATA port in order to save power.

 

 

SATA Interface setting

This feature allows you to set SATA interface setting.

Performance

Let HDD/SSD work with maximum performance.

 

(Default)

Battery life

Let HDD/SSD work with battery life mode. If this

 

setting is selected, this caused performance

 

down.

 

 

LAN

Wake-up on LAN

This feature lets the computer's power be turned on from shudown when it receives a wake-up packet (Magic packet) from the LAN.

Do not install or remove a memory module while Wake-up on LAN is enabled.

The Wake-up on LAN function consumes power even when the system is off. Leave the AC adaptor connected while using this feature.

Regarding Wake-up on LAN from sleep or hibernation, you must check the "Allow the device to wake the computer" check box within the LAN Device properties (this feature does not effect the Wake-up on LAN from sleep or hibernation).

Power will be automatically turned on when a signal is received from an administrator's computer which is connected via a network.

The following settings can be changed when the Built-in LAN is Enabled.

Connect the AC adaptor when using the Wake-up on LAN function. The battery retention time will be shorter than the times listed in this manual

User's Manual

7-5