PORTÉGÉ R700 / Satellite R630
Power On Display
This tab allows you to select the display to be used when the computer is started. Please note that this setting is only available on standard VGA mode and is not available as part of the Windows Desktop properties.
The Power On Display is supported with some models.
Selects an external monitor if one is connected, | |
| otherwise, it selects the internal display (default). |
System LCD Only | Selects the internal LCD, even if an external |
| monitor is connected. |
|
|
CPU
This function allows you to set the processor's operating mode.
Dynamic CPU Frequency Mode
This option allows you to configure the power saving modes associated with the processor - the following settings are available:
Dynamically | The processor's power consumption and |
Switchable | automatic clock speed switching functions are |
| enabled - in use the processor's operation is |
| automatically switched when necessary (default). |
|
|
Always High | The processor's power consumption and |
| automatic clock speed switching functions are |
| disabled - in use the processor will always run at |
| its highest level of power consumption and its |
| highest speed. |
Always Low | The processor's power consumption and |
| automatic clock speed switching functions are |
| disabled - in use the processor will always run at |
| a lower level of power consumption and a low |
| speed. |
|
|
Boot Priority
Boot Priority Options
This tab allows you to set the priority for booting the computer. The Boot Priority Options setting window will be displayed as shown below. Click the up and down arrow buttons to adjust the priority.
User's Manual |