PORTÉGÉ M780

Set up fingerprint registrationPlease use the following procedure when first using fingerprint authentication.

The fingerprint authentication uses the same Windows logon ID and password. If the Windows logon password has not been setup, please do so before registration.

This sensor has memory space for at least 20 fingerprint patterns. You might be able to register more fingerprint patterns depending on the sensor memory usage.

1.Click Start ->All Programs ->TOSHIBA ->Utilities ->TOSHIBA Fingerprint Utility, or click the utility icon in the Task Bar.

2.The Enroll screen is displayed. Enter the current account password into the Windows Password field. If no Windows password has been configured, you will be asked to configure the new logon password. Then click Next.

3.Click the non-enrolled finger icon above the finger you want to register and then click Next.

4.The note for enrollment operation screen is displayed. Confirm the message and then click Next.

5.The scanning practice screen is displayed. you are able to practice swiping (three times) your finger to ensure you use the correct method. When you have finished practicing swiping your finger, click Next.

6.Swipe three times with the same finger. If scanning of fingerprint succeeds, “Enrollment succeed. Do you want to save this fingerprint?” message box will appear, click OK.

7.The following message will be displayed: “It is Strongly recommended you enroll one more fingerprint.” Click OK and repeat steps 3, 4, 5 and 6 with another finger.

It is strongly recommended that you register 2 or more fingerprints.

You cannot enroll the same fingerprint more than once, even on a different User account.

User’s Manual

4-19