Toshiba load, garbled, Password, password, Keyboard, provider, Cannot enter, typing again, The following, on the screen:, Real Time Clock, produce numbers, key

			PORTÉGÉ M780
	Real Time Clock
	Problem	Procedure
	The following	The charge in the Real Time Clock (RTC) battery
	message is Displayed	has run out - you will need to set the date and
	on the screen:	time in the BIOS setup application by using the
	RTC Power	following steps:
	Failure.	1.	Turn on the computer while pressing the F2
	Check system.		key, and then release the F2 key when the
	Then press [F2]		TOSHIBA Leading Innovation >>> screen
	key.		appears - the BIOS setup application will
			load.
		2.	Set the date in the System Date field.
		3.	Set the time in the System Time field.
		4.	Press the F10 key - a confirmation message
			will be displayed.
		5.	Press the Y key - the BIOS setup application
			will end and the computer will restart.
Password
	Problem	Procedure
	Cannot enter	Please refer to the TOSHIBA Password Utility
	password	section in Chapter 6, Power and Power-Up
		Modes, for further information.

Keyboard

Keyboard problems can be caused by the setup and configuration of the computer - please refer to Chapter 5, The Keyboard, for further information.

Problem	Procedure
Some letter keys	Check that the numeric keypad overlay is not
produce numbers	activated - press the FN + F11 hot key and try
	typing again.
Output to screen is	Please refer to your software’s documentation to
garbled	ensure that its is not remapping the keyboard in
	any way (remapping involves changing or
	reassigning the function of each key).
	If you are still unable to use the keyboard, you
	should contact your reseller, dealer or service
	provider.

User’s Manual 8-7