Toshiba eSATA device

PORTÉGÉ M780

Problem	Procedure
External devices	Some external devices may not work when
connected to the	connected to a compatible port if the USB Sleep
compatible ports do	and Charge function is enabled.
not work when	Reconnect the external device after turning the
connected to a
	computer ON.
compatible port.
	If the external device still does not work, connect
	device to an USB port that does not have the
	USB Sleep and Charge function-compatible icon
	( ) or change to disable the USB Sleep and
	Charge function.
The “USB WakeUp	When USB Sleep and Charge function is
function” does not	enabled, the “USB WakeUp” function does not
work.	work for ports that support the USB Sleep and
	Charge function.
	In that case, use an USB port that does not have
	the USB Sleep and Charge function-compatible
	icon ( ) or change to disable USB Sleep and
	Charge function.

eSATA device

In addition to the information in this section, please also refer to the documentation supplied with your eSATA device.

Problem	Procedure
eSATA device does	Remove the eSATA device from the computer
not work	and then reconnect it to a free port it in order to
	ensure it is firmly attached.
	A connected eSATA device may not be
	recognized if it is connected to the computer’s
	eSATA/USB combo port while the computer is in
	Sleep Mode or Hibernation Mode. If this occurs,
	disconnect the eSATA device and then reconnect
	the device while the computer is turned on.
	Ensure that any required eSATA device drivers
	are properly installed - to achieve this you should
	refer to both the device documentation and the
	operating system documentation.
	If you are still unable to resolve the problem,
	contact your reseller, dealer or service provider.

8-18 User’s Manual