User’s Manual D-3
Wireless LAN
When installing Wireless LAN cards, the channel configuration is managed
as follows:
■For wireless clients that operate in a Wireless LAN infrastructure, the
Wireless LAN card will automatically start operation at the channel
identified by the Wireless LAN Access Point. When roamin g between
different access points the station can dynamically switch to another
channel if required.
■In a Wireless LAN Access Point, the Wireless LAN card will use the
factory-set default channel(printed in bold), unless the LAN
Administrator selecte d a different channel when configuring the
Wireless LAN Access Point device.
Table Wireless IEEE 802.11 Channels Sets (Revision A)
*1 Factory-set default channels
*2 Refer to the sheet Approved Countries/Regions for use for the
Frequency Range Ch annel ID 5150-5850 MHz Note
36 5180
40 5200
44 5220
48 5240
52 5260
56 5280
60 5300
64 5320
100 5500*3
104 5520*3
108 5540*3
112 5560*3
116 5580*3
120 5600*3
124 5620*3
128 5640*3
132 5660*3
136 5680*3
140 5700*3
149 5745*3 US only*4
153 5765*3 US only*4
157 5785*3 US only*4
161 5805*3 US only*4