The Keyboard
Press Fn + F11 to access the integrated keypad. When activated, the keys with gray markings on the bottom edge become numeric keypad keys. Refer to the Keypad overlay section in this chapter for more information on how to operate these keys. The power on default for both settings is off.
Press Fn + F12 to lock the cursor on a specific line. The power on default is off.
Hot keys
+ 
Mute: Turns the volume on and off.
+ 
Lock: Enters "Lock computer" mode. To restor your desktop, you need to log on again.
+ 
Power plan: Displays the power save modes and lets you change the power settings.
+ 
Standby: This hot key switches the system to Standby Mode.
+ 
Hibernate: This hot key switches the system to Hibernate mode.
+ 
Output: Changes the active display device.
Default resolution for simultaneous mode is set to 1024 × 768. If you connect an RGB (Monitor) that is not 1024 × 768 resolution, change it in "Display Properties".
+ 
Brightness (decreases): Turns the monitor brightness down.
User’s Manual |