Toshiba R200 - page 251

4.16 MP FPC 4 Replacement Procedures
PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 4-35
Installing the MP FPC
To install the MP FPC, follow the steps below and refer to Figure 4-23.
1. Connect the MP FPC to the connector CN9500 on the system board and secure it
with the following screws.
• M2×3C S-FLAT HEAD screw x2
2. Install the kill switch holder and secure it with the following screw.
• M2×3C S-FLAT HEAD screw x1