3 Tests and Diagnostics 3.29 SETUP
3-98 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519)
(b) HDD Priority
Set the priority of the HDD as a startup device.
Built-in HDD→USB The priority is set as built-in HDD→USB (Default)
USB→Built-in HDD The priority is set as USB memory→built-in HDD.
7. Display
This group of options configures the computer’s display.
(a) Power On Display
This option is used to select the display when booting up.
Auto-Selected Selects an external monitor if one is connected.
Otherwise it selects the internal LCD. (Default)
LCD+AnalogRGB Selects both the internal LCD and the external monitor
for simultaneous display.
NOTE: When starting the computer in Resume mode, the last configuration is
remembered. If data does not appear on the display you are using after starting
in Resume mode, pressing Fn+F5.
Pressing Fn+F5 changes the display setting as follows in order: the internal
LCD, the external display, both the internal LCD and the external display.
When an external display, which does not support SVGA mode is connected and
“LCD+AnalogRGB”
is selected, the external display is not displayed.
(b) LCD Display Stretch
LCD Display Stretch enables or disables a larger display area of the screen.
Enabled Enables the LCD display stretch feature. (Default)
Disabled Disables the LCD display stretch feature.