2.Remove the AC adaptor and all cables and peripherals connected to the computer.

3.Close the display panel.

4.Turn the computer upside down and remove the battery pack (refer to Replacing the battery pack section in Chapter 5, Power and Power-Up Modes, if required).

5.Loosen the screw(s) securing the memory module cover in place - please note that the screw(s) are attached to the cover in order to prevent them from being lost.

6.Slide your fingernail or a thin object under the cover and lift it off.

Figure 3-12 Removing the memory module cover (R940)

2

1

1. Screw

2. Memory module cover

User's Manual

3-38