Problem

Procedure

I cannot use the

Sleep and Charge function may be disabled.

Sleep and Charge

Select the "Enable Sleep and Charge" check box

function.

in the TOSHIBA Sleep utility to enable this

 

 

function.

 

When there is a current overflow of the external

 

device connected to the compatible port, USB bus

 

power (DC5V) supply may be stopped for safety

 

reasons. When this happens, disconnect an

 

external device if some external devices are

 

connected. After that, turn the power of the

 

computer ON/OFF to restore the function. If this

 

function can not be still used even if only one

 

external device is connected, stop using the

 

external device because its current is over the

 

acceptable value of this computer.

 

Some external devices may not be able to use the

 

Sleep and Charge function. In this case, please try

 

one or more of the following methods.

 

Turn OFF the computer while external devices

 

are connected.

 

Connect external devices after turning OFF of

 

the computer.

 

If this function can not be still used, change the

 

setting to disable the function and stop using this

 

function.

 

 

The battery depletes

If Sleep and Charge function is enabled, the

quickly even when I

computer's battery will discharge during

turned OFF the

hibernation or when the computer is turned off.

power of the

Connect the AC adaptor to the computer or disable

computer.

the Sleep and Charge function.

 

 

 

External devices

Some external devices may not work when

connected to the

connected to a compatible port if the Sleep and

compatible ports do

Charge function is enabled.

not work when

Reconnect the external device after turning the

connected to a

computer ON.

compatible port.

If the external device still does not work, connect

 

 

device to an USB port that does not have the

 

Sleep and Charge function-compatible icon ( ) or

 

change to disable the Sleep and Charge function.

 

 

User's Manual

6-13