Smart Card
A Smart Card is a credit card sized plastic card. An extremely thin integrated circuit (IC chip) is embedded into the card on which information can be recorded. These cards can be used for a wide variety of applications including telephone related and electronic monetary payments.
This section contains information on the proper use of the Smart Card slot, and it is strongly recommended that you read it before operating the computer.
Some models are equipped with a Smart Card slot.
Your computer supports
Inserting a Smart Card
The Smart Card slot is located on the side of the computer. The Windows
To install a Smart Card, follow the steps as detailed below:
1.Insert the Smart Card into the Smart Card slot with the metal connectors facing up.
2.Press the Smart Card gently to ensure a firm connection is made. The computer will identify the Smart Card and display an icon in the Windows Taskbar.
When inserting a Smart Card into the Smart Card slot, make sure to confirm that the card is oriented correctly before inserting.
Insert the Smart Card until it reaches the end of the Smart Card slot. There will be about 2cm of the Smart Card sticking out of the Smart Card slot. Do not attempt to insert it further.
Always remove the Smart Card from the Smart Card slot before moving the computer.
Remove the Smart Card after use.
Failure to follow these instructions may result in damage to the computer and/or damage to the Smart Card.
3.After inserting the Smart Card, you should refer to its documentation and also check the configuration in Windows in order to ensure that it is correct.
Removing a Smart Card
To remove a Smart Card, follow the steps as detailed below:
1.Open the Safely Remove Hardware and Eject Media icon on the Windows Taskbar.
User's Manual |