Toshiba RD-XS32SB owner manual 115, Press / to select Start, and select Yes, then press Enter

5 Press / to select “Start”, and select “Yes”, then press ENTER.

	Copying starts.
	To confirm the job progress, press the TIME BAR button
ENTER	to display the time bar. (The time bar cannot be copied.)
	When copying is completed, the buzzer sounds and the
	current broadcast picture appears.
	Pictures and sounds displayed during copying are for
	monitoring purposes only. Recorded picture quality may
	vary.

Introduction RecordingPlayback

Cancelling dubbing during rate conversion dubbing

1)Press QUICK MENU.

2)Press / to select “Cancel dubbing”.

3)Press ENTER.

Note

•A portion of content from the start of recording to the moment you cancel dubbing will be copied.

Turning off the power automatically after dubbing

1)During dubbing, press QUICK MENU.

2)Press / to select “Auto power off”.

3)Press ENTER.

Notes

•Unlike High speed dubbing, Rate conversion dubbing may cause slight deterioration in picture and sound quality of recorded content. The time required for dubbing is about the same as the playback time of the content.

•Quality will not be improved even if you select a rate higher than original content.

•Chapter marks are not copied.

•Rate conversion dubbing to the same DVD-RAM/R/RW disc is not possible.

•The recorder automatically inserts a black picture for a moment before and after the new title produced by this recording process.

•You cannot use the Rate conversion dubbing for copying from a DVD-RAM disc to another DVD-RAM disc.

•During Rate conversion dubbing, the relay recording

function ( page 48) is disabled even if “Relay recording” ( page 162) is set to “On”.

•During Rate conversion dubbing, switching the audio channel is not possible.

•Audio processed under the Rate conversion dubbing is recorded in stereo.

•When you record a NICAM programme and play it back, the left and right channels are output at the same time. Select the sound by pressing the AUDIO button.

•When you set “DVD compatible mode” to “On (Mode I)” or

“On (Mode II)” ( page 162), only a selected sound (the left and right channels) of the NICAM programme is recorded. (Stereo broadcasting is recorded as stereo).

•If you perform the Rate conversion dubbing for a Playlist, containing a chapter that is the beginning of the Original title at recording, one frame at the beginning will be removed.

•During Rate conversion dubbing, P in P function ( page 69), zoom function ( page 72), “Custom picture select” ( page 157) and “Play DNR” ( page 158) are disabled.

•Rate conversion dubbing to DVD-R/RW selects aspect ratio according to the first title of dubbed items.

•Each part, when selected, shows its name at the bottom of the menu for about 2 seconds.

Editing

LibraryFunction setupOthers

115